Alipay+ DocsAlipay+ Docs

Bind the user account

To obtain the user authorization for deducting funds from a specific wallet account, the Acquiring Service Provider (ACQP) must take the following integration steps to enable the user to bind the wallet account with his/her merchant account:

With Alipay+ support, the user can bind multiple wallets with the same merchant account, and one wallet account can be bound with multiple merchants. If any regulation on the number of merchants exists in a country/region, comply with the regulation.

Before you begin

Different ACQPs provide different service modes, for example:

  • some ACQPs provide the payment capability to merchants by packaging the client side and the server side into an integrated service.
  • some ACQPs only provide the server side ability, while merchants are required to integrate the Alipay+ client side.

Therefore, for the convenience of developers to read this document, no matter which service mode is used, "your client side" and "your server side" are used uniformly to refer to the corresponding client side and server side in different service mode.

Workflow

The following figure illustrates the workflow of account binding.

bind the user account EN.jpg

Figure 1. Workflow of binding the user account

Note: The payment method page mentioned in Figure 1 is also known as merchant's cashier page.

The account binding process consists of the following steps:

  1. The user chooses to start the account binding process on the payment method page after placing an order or on the add payment method page. (Step 1)
  2. Your client side renders the payment method page or add payment method page in the following two steps: (Step 2-6)
    1. Your client side consults the information about Alipay+ payment method.
    2. Your client side renders the payment method page or add payment method page with the information that is obtained in the previous step.
  1. After the user chooses the Alipay+ payment method, your client side initiates the account binding process and opens the Alipay+ wallet page, which displays all the wallets that are supported by Alipay+ and the promotion information corresponding to each wallet. (Step 7-12)
    • If the terminal type of your client side is Web and the wallet that the user chooses supports code scanning, the user can open the wallet app to scan the QR code for account binding.
    • Otherwise, the user chooses one of the wallets and gets redirected to the authorization URL of the selected wallet for account binding. (Step 13-14)
  1. After the user signs the authorization agreement, the user is redirected back to the merchant with an auth code. Meanwhile, Alipay+ notifies your server side of the auth code, which is then synced to your client side. (Step 15 - 19)
  2. With the received auth code, your client side initiates a request for the access token via your server side. Your server side sends an applyToken API request to Alipay+, who then returns the access token and information about the newly bound wallet in the synchronous response and a separate asynchronous notification. (Step 20 - 25)
  3. After your client side receives the access token, your client side processes the account binding logic and updates the payment method page or add payment method page to display the newly bound wallet to the user. (Step 26 - 27)

Step 1: Render the payment method page or add payment method page

Alipay+ allows you to provide the entry point for account binding on either of the following pages:

  • On the payment method page after the user places an order
  • On the add payment method page where the user manages the payment methods

Regardless of the page that you use, you need to render the page with the Alipay+ logo and promotion information. To do this, your client side needs to take the following steps:

1. Consult the information about the Alipay+ payment method

You need to consult the following information about the payment method from Alipay+:

  • whether the Alipay+ payment method is available
  • if available, the Alipay+ logo and promotion information (if any)

Alipay+ provides three methods for you to consult the information about the Alipay+ payment method. The following table shows the details and an applicable scenario that is recommended for each method.

Method

Description

Recommended applicable scenario

Method 1:

Integrate the Alipay+ Web/WAP SDK

Alipay+ provides the Web/WAP SDK for your client side to directly consult the information about the Alipay+ payment method. If the terminal type of your client side is Web or WAP, your client side can integrate the Web/WAP SDK.

If you provide a front-end component for the merchant to render the payment method page or add payment method page, you can choose this method to integrate the Alipay+ Web/WAP SDK into the front-end component.

Method 2:

Request JSON data from the Alipay+ CDN server

You can request information about the Alipay+ payment method by requesting JSON data from the Alipay+ CDN server via a URL that is constructed according to rules specified in Request JSON data from the Alipay+ CDN server. You need to parse the JSON data and display the Alipay+ payment method accordingly.

This method is applicable if you want to consult payment method information with your server side, or if you need complete information about the Alipay+ payment method, which includes not only logo assets but also an explicit indicator of whether the Alipay+ payment method is available, logo width and logo height, and promotion campaign name.

Method 3:

Request logo assets from the Alipay+ CDN server

You can directly request logo assets of the Alipay+ payment method from the Alipay+ CDN server via URLs that are constructed according to rules specified in Request logo assets from the Alipay+ CDN server.

You need to display the Alipay+ payment method correctly with the logo assets.

This method is applicable if you cannot integrate the Alipay+ SDK or parse JSON data, given that your client side can request logo assets from the Alipay+ CDN server and display the Alipay+ payment method correctly.

For more information about how to implement these three methods, see How to consult the payment information.

2. Render the payment method page or add payment method page with the information

With the information that is returned in Step 1.1, your client side needs to follow the Alipay+ brand display guidelines to render the payment method page or add payment method page. For more information, see Brand display guidelines for Auto Debit in Alipay+ Brand Guidelines.

Step 2: Initiate account binding

After the user chooses Alipay+ on the payment method page or add payment method page, you need to take the following steps to initiate the account binding process:

1. Integrate the prepare API

Your server side needs to integrate the prepare API provided by Alipay+ to obtain the URL of the Alipay+ wallet page and return it to the client side.

Processing logic

  • The following list provides the key information that you need to take into consideration when configuring the request parameters of the prepare API:
    • authState: specifies the authorization statement that is provided by the auth client.
    • authRedirectUrl: specifies authorization redirection URL, of which the domain name is provided by the auth client. This URL will be used by the MPP (wallet) to reconstruct a complete URL that redirects the user back to the merchant when the user completes the authorization process at the wallet side. Compared with the URL that is specified on the authRedirectUrl parameter, the complete URL is carried with the two additional parameters:
      • authCode: the auth code that is used later by the auth client to obtain the access token. The auth code is created by the MPP. For more information about the auth code, see Retrieve the auth code.
      • authState: the auth statement that is specified on the authState parameter of the prepare interface. The value is used to prevent the CRSF attack.

The following example shows a complete URL that is constructed based on the authRedirectUrl parameter: https://www.merchant.com/authorizationResult?authCode=281010133AB2F588D14B432312345678&authState=663A8FA9-D836-48EE-8AA1-1FF682989DC7

    • scopes: specifies the authorization scope. Set the value as required. In this account binding scenario, the value must be set as ["AGREEMENT_PAY", "USER_LOGIN_ID"].
    • (optional) authNotifyUrl: specifies the URL that is used by Alipay+ to notify your server side of the authorization information, for example, an auth code or an access token is created. This parameter is required if you want to receive the authorization notification from Alipay+. For security reasons, the URL must use HTTPS instead of HTTP.
    • paymentAmount: The amount that you request to receive from Alipay+. If the payment amount cannot be provided, set paymentAmount parameter to 0. Set paymentAmount.currency to the currency that you use to create the payment order after account binding succeeds.
    • settlementStrategy: The settlement strategy that is applied to the payment order, for example, the currency that you want to be settled against.
    • (optional) userRegion: This parameter is used to sort the payment method list in descending order based on the relevance between the MPP and the user region.
    • (optional) boundWalletNames: The names of wallets that are already bound with the user account.
    • terminalType, osType: specifies the information of the terminal type and operating system of the merchant. terminalType is required, and osType is required when the terminal type is APP or WAP.
  • The following parameters might be returned in the response:
    • normalUrl: The Alipay+ wallet page URL that redirects users to a Web/WAP browser or WebView.
  • The following table lists the different results that your server side might receive from Alipay+.

result.resultStatus

result.resultCode

Actions

S

SUCCESS

The URL of the Alipay+ wallet page has been returned from Alipay+. The merchant needs to redirect the user to the URL so that the user can proceed with the account binding process.

F

...

The request failed at the Alipay+ side. Take actions according to the error message in result.resultCode.

U

...

Retry the request with the same request parameters.

No result received

Sample

The ACQP sends a prepare request to Alipay+.

copy
{
    "paymentAmount": {
        "currency": "JPY",
        "value": "100"
    },
    "settlementStrategy": {
        "settlementCurrency": "JPY"
    },
    "userRegion": "JP",
    "authClientId": "2188123412341234",
    "authClientName": "Merchant",
    "authClientDisplayName": "Merchant display",
    "referenceMerchantId": "2188123412341230",
    "authRedirectUrl": "https://www.merchant.com/authenticationResult?param1=123&param2=234",
    "scopes": [
        "AGREEMENT_PAY"
    ],
    "authState": "663A8FA9-D836-48EE-8AA1-1FF682989DC7",
    "terminalType": "WEB",
    "referenceAgreementId": "aNDJWQNNabdad1234",
    "osType": "IOS",
    "osVersion": "11.0.2",
    "authNotifyUrl": "https://www.merchant.com/authenticationNotify?referenceAgreementId=aNDJWQNNabdad1234"
}

Alipay+ returns a response to the ACQP.

copy
{
  "acquirerId": "102218800000001234",
  "pspId": "102208800000001230",
  "result": {
    "resultCode": "SUCCESS",
    "resultMessage": "Success",
    "resultStatus": "S"
  },
  "normalUrl": "https://openauth.xxx.com/authentication.htm?authId=FBF16F91-28FB-47EC-B9BE-27B285C23CD3"
}

For more information about how to use the prepare API (such as the field description and format), see prepare.

2. Open the Alipay+ wallet page

After your server side handles the prepare API response successfully, your client side needs to further open the Alipay+ wallet page, where the user chooses a wallet that is supported by Alipay+ and gets redirected to the wallet side to confirm authorization.

The redirection from your client side to the wallet client through the Alipay+ wallet page can happen only between certain terminal types of client-side. See the following table for details.

From

merchant (your client side)

To digital wallet through Alipay+ wallet page

App

WAP

Web

App

N/A

✅ Supported.

N/A

WAP

N/A

✅ Supported.

The user can be redirected from the merchant's WAP page only to the Alipay+ wallet page in a WAP browser.

Otherwise, when redirecting the user back from a wallet app to a WAP page, the user login info might be lost and result in authorization failure.

N/A

Web

N/A

N/A

✅ Supported.

The user can be redirected from the merchant's Web page only to the Alipay+ wallet page in a Web browser.

Your client side needs to open the Alipay+ wallet page by using the URL that is returned by your server side. The URL is specified on the normalUrl parameter that is returned in Step 2.1. Depending on the terminal type and the operating system of your client side, the way to open the URL is different. Refer to the following samples for details.

For Android app

copy
try {
    Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse(normalUrl));
    intent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK); 
    startActivity(intent);
} catch (Exception e) {
    e.printStackTrace();
}

For iOS app

copy
if ([[[UIDevice currentDevice] systemVersion] floatValue] >= 10.0) {
    [[UIApplication sharedApplication] openURL:url options:@{} completionHandler:nil];
}else{
    [[UIApplication sharedApplication] openURL:url];
}

For Web or WAP

copy
window.location.href = normalUrl;

Step 3: Retrieve the auth code

After the previous step, the user is redirected to the wallet's authorization page. After the user confirms authorization at the wallet side, the MPP (wallet) redirects the user back to your client side by using a URL that consists of the authorization redirection URL (authRedirectUrl), auth code (authCode) and auth statement (authState).

The redirection from the wallet side back to the merchant side can happen only between certain terminal types of client-side. See the following table for details.

From

digital wallet

To merchant (your client side)

App

WAP

Web

App

✅ Supported.

N/A

The user can only be redirected from the merchant's WAP page to the Alipay+ wallet page in a WAP browser. Therefore, the redirection-back from the wallet app to the merchant WAP client will not occur.

N/A

WAP

✅ Supported.

Used when the digital wallet app is not available.

✅ Supported.

N/A

Web

N/A

N/A

✅ Supported.

Asynchronously, Alipay+ calls the authNotify API to send a notification to the URL that you specified on the authNotifyUrl parameter of the prepare API request. The notification also contains the auth code. After receiving the notification, your server side needs to notify your client side of the auth code.

For more information about how to handle the authNotify API request and return a response, see Receive authorization notification.

You need to retrieve the auth code for the succeeding request for an access token as follows:

  • If both the authNotify API and the authorization redirection URL provide the authCode, the one from the authorization redirection URL is preferred.
  • If only the authNotify API provides the authCode, you must decide whether or not to use the authCode to call the applyToken API. This is because if the redirection back to your client side fails and you complete the accounting binding by using the authCode from the authNotify API, there is no redirect-back page to inform the user of the account binding result.

Notes:

  • It is strongly recommended that your server side integrates the authNotify API to ensure authorization success. Because in scenarios where the merchant uses a WAP page and the wallet uses an app, the user's login session can be lost as the wallet redirects the user back to the user's default browser, which might not be the browser of the merchant's WAP page. In this case, the authorization cannot be continued. This is especially prone to happen for some wallets, such as AlipayCN and Kakao Pay, which only support authorization in apps. However, if the authNotify API is used to obtain the auth code, the merchant can continue with the authorization as there is no need to check the user's login session in the front end.
  • Since the redirection from the wallet to the merchant after the user completes authorization relies on the URL redirection, the process might be interrupted for some reason. Your server side needs to use a separate notification to notify your client side of the auth code after receiving it from Alipay+.

Step 4: Request the access token

After the previous step, you need to request an access token from Alipay+ with the auth code that is retrieved in Step 3. After receiving the access token from your server side, your client side then binds the access token with the user account and updates the payment method page or add payment method page to display the newly bound wallet to the user. The access token is also used by your client side to initiate payments later.

You can obtain the access token in the following two ways:

  • from the synchronous response of the applyToken request
  • from the asynchronous notification that is sent by Alipay+ by calling the authNotify API after processing the applyToken request. Integration of the authNotify API is optional but recommended.

Note: If both the applyToken API response and the authNotify API request provide the accessToken, the one from the applyToken API response is preferred.

1. Integrate the applyToken API

Your server side needs to integrate the applyToken API provided by Alipay+ to request the access token.

Processing logic

  • The following list provides the key information that you need to take into consideration when configuring the request parameters of the applyToken API:
    • authClientId: the unique identifier for the auth client. Normally, it is a unique ID for the merchant.
    • grantType: to request an access token with the auth code, set the grant type as AUTHORIZATION_CODE.
    • authCode: use the auth code that is received from Alipay+ in Step 3.
  • The following parameters might be returned in the response:
    • walletForAccountBinding: the wallet that is selected by the user for account binding. Returned only if the access token is successfully created.
  • The following table lists the different results that you might receive from Alipay+.

result.resultStatus

result.resultCode

Actions

S

SUCCESS

The access token is created successfully. Your server side can send the access token to your client side, who then proceeds to the next action.

F

...

The access token application failed. Your server side syncs the result with your client side, who needs to guide the user to restart the account binding process.

U

...

The result of the access token application is unknown. Your server side syncs the result with your client side and waits for the authorization notification from Alipay+. Your client side can either wait for the authorization notification, or guide the user to restart the account binding process.

No result received

Note: The access token application request must be initiated within 3 minutes once the authorization code is obtained. If the interval time exceeds 3 minutes, your client side needs to reinitiate the account binding process.

Sample

The ACQP sends an applyToken request to Alipay+.

copy
{
    "authClientId": "2188123412341234",
    "authCode": "281010133AB2F588D14B432312345678",
    "grantType": "AUTHORIZATION_CODE"
}

Alipay+ returns a response to the ACQP.

copy
{
  "acquirerId": "102218800000001234",
  "pspId": "102208800000001234",
  "result": {
    "resultCode": "SUCCESS",
    "resultMessage": "Success",
    "resultStatus": "S"
  },
  "customerId": "2789808912332134556711234",
  "userLoginId": "62-34312736",
  "accessToken": "281010033AB2F588D14B43238637264FCA5A1234",
  "accessTokenExpiryTime": "2022-06-06T12:12:12+08:00",
  "refreshToken": "2810100334F62CBC577F468AAC87CFC6C9101234",
  "refreshTokenExpiryTime": "2022-06-08T12:12:12+08:00",
  "walletForAccountBinding": {
        "walletName": "AlipayCN",
        "walletBrandName": "AlipayCN",
        "walletLogo": {
            "logoName": "AlipayCN",
            "logoUrl": "https://www.alipayplus.com/logo/20022222xxx.png"
        }
    }
}

For more information about how to use the applyToken API (such as the field description and format), see applyToken.

2. Handle the authNotify API request

After processing the applyToken API request successfully, Alipay+ asynchronously calls the authNotify API to send a notification to the URL that you specified on the authNotifyUrl parameter of the prepare API request. The notification also contains the access token. After receiving the notification, your server side needs to notify your client side of the access token.

For more information about how to handle the authNotify API request and return a response, see Receive authorization notification.